PaintNuts Garden Furniture Paint - Agate Grey (RAL-7038)

Directions when using paint brush / roller

1. SURFACE PREPARATION

Use a clean cloth with hot soapy water to remove any dust or dirt on the surface.
Once dry use PaintNuts Degreaser to remove any stubborn contaminants, grease or wax.
Use a light grit scotch cloth to 'key' the surface to take off the sheen and improve adhesion for a longer lasting finish.
Wipe down the surface with degreaser again to remove any residue and leave to dry.
Once dry, if required, mask around the surface area with masking tape and paper ready for painting.
Mix paint for at least 2 minutes prior to application to ensure colour consistency.

2. APPLICATION

Brush on in smooth strokes. Leave to dry for 15 minutes before applying a second coat.
Once you’ve finished painting wait 15 minutes then carefully remove the masking tape, ensuring you pull the tape away from the painted edge not across it.
Leave to dry for 1-2 hours before touching and 72 hours before cleaning.

PLEASE NOTE: Paint should not be applied in cold, damp weather – it will adversely affect the application, finish, and drying time. The recommended minimum temperature for painting is between 10°C and 25°C, preferably out of direct sunlight.

3. CLEANING & STORAGE

Remove as much paint as possible and clean equipment with thinners.
Store indoors in a cool, dry location between 5°C and 25°C and out of direct sunlight.
Use within 12 months once opened.

---------------

Directions for aerosol / spray can application

1. SURFACE PREPARATION

Use a clean cloth with hot soapy water to remove any dust or dirt on the surface.
Once dry use PaintNuts Degreaser to remove any stubborn contaminants, grease or wax.
Use a light grit scotch cloth to 'key' the surface to take off the sheen and improve adhesion for a longer lasting finish.
Wipe down the surface with degreaser again to remove any residue and leave to dry.
Once dry, if required, mask around the surface area with masking tape and paper ready for painting.
Shake the spray can vigorously for 2-3 minutes until the agitator ball is free and the paint is thoroughly mixed.
Before applying the paint, we recommend testing the colour and adjusting the spray nozzle for either horizontal or vertical painting.

2. APPLICATION

Apply in smooth cross coats 250mm distance from the surface, either vertically or horizontally
Leave to dry for 15 minutes before applying a recommended second coat
Once you’ve finished painting wait 15 minutes then carefully remove the masking tape, ensuring you pull the tape away from the painted edge not across it.
Leave to dry for 1-2 hours before touching and 48 hours before cleaning.

3. CLEANING & STORAGE

After use turn the aerosol upside down and press to empty nozzle and valve, wipe the nozzle with a cloth to remove any excess paint, it can be reused at a later date.
Remove as much paint as possible and clean equipment with thinners.
Store indoors in a cool, dry location between 5°C and 25°C and out of direct sunlight.
Use within 12 months once opened.

PLEASE NOTE: Paint should not be applied in cold, damp weather – it will adversely affect the application, finish, and drying time. The recommended minimum temperature for using spray paint is 15+ degrees, preferably room temperature in a warm and well-ventilated area.